Now we can start talking about Geometry. And Geometry of course, is the study of shapes. Now for some people who are visually oriented, Geometry comes very naturally. And other people who have not developed their visual skills, Geometry can be a little bit harder. Especially for the folks who are, for whom Geometry is a little bit harder, here's what I'm gonna say. Read full transcript
It is not enough simply to watch these videos. After you watch these, get out paper and a ruler and draw these different shapes, actually physically draw them on paper. And build shapes and physical objects. You can use pencils, toothpicks, straws, anything like that. Actually build triangles, build rectangles, actually look at them.
Use your hands, our hands are actually part of our intelligence. You're using your hands, you're engaging every part of the brain and will make it much easier, to understand all these relationships. So let's start with lines. Lines are straight and they go on forever in both directions. So here we have a bunch of different straight lines, in a bunch of different directions.You have to imagine that at the end of each line there are some arrows or something like that, to indicate that the lines actually do go on forever in both directions.
It's very important not to confuse straight with horizontal. Those two words have very different meanings, but sometimes, there are some students who confuse them. All lines are straight. So all the lines that we had on the previous slide, lines going in different directions, all of those are straight lines.
And you can always assume that a line is straight on the test. If it looks straight, it is straight. That is always true on the test. But some lines are drawn horizontally for convenience, but you can never assume that lines are exactly horizontal or vertical, simply because they appear so. Now people get really confused on this, if you are confused, if you think that horizontal and straight mean the same thing.
Then when we say that you can assume from the test, that lines are straight. People mistakenly assume that this also means they can assume lines are horizontal, and that is not correct. A line segment is a finite piece of a line. So for example, here we have a line segment, it has two endpoints. And when these endpoints are labeled, that makes it easy to discuss.
This is line segment AB. And for the purpose of the test, AB can either mean the actual shape of the line segment itself. Or it can mean the length of the line segment, the numerical length. An angle occurs between two lines, or two segments. So for example, here we have an angle.
This happens to be between one line and one segment. The best way to understand an angle is to think of it dynamically, as the act of turning or rotating. So in other words, going from here to here. That is what an angle is, it's that dynamic space in between the two lines. If we label points, we can talk about an angle.
We could call this angle either CDE or EDC, Point D, the vertex of the angle. Right here, the point of the angle must be in the middle of the name. And so, we can call either CDE or EDC, as long as the vertex is in the middle. Sometimes in these videos I'll also use the single angle name, if there's no ambiguity. For example, there's only one angle in this diagram.
So I could call it angle D. Theoretically, that could occur on the test. Although the test is often careful enough, to use a three-letter name always for an angle. We measure the size of an angle in degrees. The test can state these directly, so 50 degrees.
Alternately, the test can label the diagram and state the measure of the angle in the text. So angle GFH = 50 degrees because they put letters on the points in the diagram. We can just use that to talk about that measure, in the number of degrees in the text. Actually, the probably it's favorite thing to do is the following just specify angle, with a variable number degrees.
This flexible format allows them either to specify the angle, for in the text, they could say x = 50, or they could ask a question about it. They could give us other information and say find x. So they would like doing this. We'll do a quick review of basic degree facts. In a straight angle, there are 180 degrees and of course remember a straight line can go in any direction.
But if there's any point on the straight line, all the way around from one side of the line to the other. That's 180 degrees, there are 90 degrees in a right angle. So here we have two lines intersecting at right angles. There are actually four right angles at that intersection. If the two lines or segments meet at right angles, they are called perpendicular, that is a term you should know.
The test can either draw that little square, the perpendicular sign, which is that little square, or it can indicate that the angle is 90 degrees. It can label 90 degrees in the diagram or X degrees and tell us in the text that X equals 90. So there are variety ways that they can tell us that is a 90 degree angle. Don't assume that two lines are perpendicular if you are not explicitly told so, this is often a trap.
Suppose these points appear as part of a larger diagram, and no further information is given. Certainly looks like those could be at a right angle, and that's a very tempting thing to assume. The test would love for you to make the mistake, of assuming that the lines are perpendicular, and that the angle equals exactly 90 degrees.
In fact it doesn't, I've drawn this so that, that angle there is an angle of 89.6 degrees. So, it's close to being a right angle, and it may look like a right angle to the naked eye, but none of the special right angle properties are true. And in upcoming videos, we'll be talking more about special right angle properties. None of the special right angle properties are true, if the angle is close to 90 but not exactly 90.
Very important, so you cannot assume that two lines are perpendicular, unless you have some sort of justification for doing so. One term I will introduce, which probably will not appear on the test, is congruent. Congruent is like equal, for shapes. We use the concept of equal for a number, and the very similar concept of "congruent" for shapes.
Two shapes are congruent, if they have the same shape and the same size. They don't have to have the same orientation. So for example, the purple and the green shapes here are congruent, one is flipped over from the other. One you could say is a right handed version, and the other is a left handed version, but it is the same shape fundamentally.
These two are congruent, even though they have different orientations. A bisector cuts something into two congruent pieces. An angle bisector cuts an angle into two smaller congruent angles. So for example here we have an angle bisector. If we're told for example that the big angle, PNM is 40 degrees, and that NQ bisects the angle, then we can deduce that the two smaller angles each have to be 20 degrees.
They each have to be exactly half equal to each other, because the angle was bisected. Similarly the bisector of a segment may be a point, another segment or a line, the bisected divides the segment into two equal halves. So notice here segment ST bisects PQ, also notice it's definitely true that PQ does not bisect ST, because SR is clearly bigger than RT.
So the fact that ST bisects PQ means that R is the midpoint of PQ, and that PR = RQ. We've divided it into two equal halves, and again, that's always what bisecting means. Sometimes, a line will bisect a segment and also be perpendicular to it. The line is called a perpendicular bisector of the segment.
Line VW is perpendicular, it's the perpendicular bisector of TU. Every point on the perpendicular bisector of a segment, is equidistant from the two endpoints on the segment. And so that's a really handy fact to know, that shows up in a variety of ways. The perpendicular bisector in fact is the set of all possible points, that are equidistant from the two endpoints of the segment.
Now some basic facts about angles. We've already said that a straight line contains 180 degrees. This means that if two or more angles lie in a straight line, the sum of their angles is 180 degrees. So for example, we can assume that that long line is straight. It doesn't have some kind of slight bend at that point.
The test will not do that to us, if it looks straight, it is straight. And therefore, we know that those two angles together make 180. So, x + y = 180. If the two angles add up to 180, then they are called supplementary. Two angles on a straight line are always supplementary. So p + q = 180.
When two lines cross, four angles are formed. So here we have two lines that are going on forever in both directions, they have to cross, and these four angles are formed. The pairs of angles opposite each other, sharing only the vertex in common, are called vertical angles, and vertical angles are always congruent. So for example, A and C, they don't share any sides.
All a and c have in common is that they touch at a single vertex. They touch at the vertex, b and d also touch at the vertex. And so that's why they are called vertical angles, cause they meet at a vertex. So we know that vertical angles are congruent, we know that a = c, and b = d. Of course, the pairs of angles next to each other, a + b, b + c, all of those are supplementary.
They all add up to 180 degrees, because we have pairs of angles on a line. Therefore, if we were given one angle in this diagram, we can find the other three. For example, if a = 35, we know that c has to be equal. That also has to be 35 degrees. And b and d have to be the supplementary angle of 145 degrees. So that any two pairs together, any two angles together in a pair, add up to 180 degrees.
Here's a practice problem, pause the video and then we'll talk about this. Okay In the diagram x = 40 degrees and RT bisects the big angle SRU ,which is a very big angle. Well SRU is the supplementary angle to that 40 degree angle, so SRU has to be 180 minus 40 which would be 140. So SRU is 140.
And this angle is bisected, because it bisected it's cut into two equal halves. So there's two halves each one has to be 70 degrees. SRT =70 degrees, TRU = 70 degree. Those are the two equal halves of the angle that was bisected. Well now notice that the angle TRV, that angle is made of TRU and angle x, which we know.
We know TRU Is 70 degrees we know that angle X is 40 degrees, so we add them together. TRV has to be an angle of 110 degrees. Now notice that TRV is the vertical angle of SRW, so those two have to be equal. So that means SRW also has to be 110 degree angle, so Y equals 110. Finally we will review parallel lines.
If two lines are parallel, they never intersect, and they are always exactly the same distance apart. And again, this is another one of these properties, like perpendicular, close to parallel, doesn't count for beans. You have to know that the two lines are exactly parallel. Obviously, since parallel lines never intersect, they never form angles with each other.
We get many angles though, if a third non-parallel line cuts across the two parallel lines. This third line is called a transversal, a transversal is a line that cuts across two parallel line. So here we have a transversal cutting across the parallel lines WX and YZ. And we get eight angels there.
Now the four big angels are all equal. And the four little angels are all equal. So in other words a = d = e = h and b = c = f = g, that's the big idea. Now among these, of course you may remember from geometry there's all kinds of special names.
Alternate interior and same side exterior and corresponding angles. If you want to remember all those special names, that's great, you don't need to. All you need to remember is all the big angles are equal, all the little angles are equal. So here's the diagram again, and now I've labeled it so that it's clear that everything is equal.
Also notice that p and q are supplementary. So any big angle plus any little angle equals 180 degrees, that's a really big idea. Thus, if we are given the degree of any one of the angles here, we could find the other seven. In summary, we talked about lines and line segments, we talked about angles and degrees.
We pointed out that there are 180 degrees in a straight angle, and 90 degrees in a right angle. We talked about angle bisectors and perpendicular bisectors. An angle bisector divides an angle into two smaller equal angles. A perpendicular bisector is perpendicular to a segment, and divides it into two equal halves.
We talked about how two angles on a line are supplementary. Vertical angles are congruent. And we talked about the angles formed by a transversal, intersecting a pair of parallel lines. And we will talk about many applications of these fundamental ideas, in the upcoming videos.